Aluminum Foil Tape

DunCan DC8005S

DunCan DC8005S Flame-Retardant Self-Adhesive Aluminum Foil Tape

  • 30 micron nominal high tensile strength aluminum foil backing with aggressive
    flame-retardant acrylic adhesive and protected by easy-release liner.


  • With Aluminum backing provides excellent reflection of both heat and light.

  • High quality adhesive with super strong adhesion and holding power offers
    reliable and durable Foil-Scrim-Kraft Facing joints and seems sealing
    in HVAC ductwork /b3759 Suitable for sealing joints in foil
    faced insulation in refrigeration industry.

  • Extensively used in HVAC industry for joining and sealing foil facing
    laminated fiberglass blanket/duct board joints and seams; joining
    and sealing flexible air duct seams and connections.

  • May also be used for other industrial uses requiring a tape with these
    characteristics and benefits.



DunCan DC8005S High Quality Flame Retardant Adhesive
Aluminum Foil Tape

 

Features :

  • Excellent Peel Adhesion.
  • Good initial Tack & Permanent Bonding.
  • Outstanding Temperature & Aging Resistance.
  • BS 476 Class 0 compliance. Independently tested to
    BS 476 Part  6 & Part 7-Class 1.
  • Resists water vapor, odor and smoke transmission.
  • Indefinite product life after application.
  • With individual vacuum packing.



Product Characteristics :

General
Finish
DunCan DC8005S High Quality Flame Retardant Self-Adhesive
Aluminum Foil Tape

Nominal 30 micron bright aluminum foil
70 microns total thickness
without release paper
Packaging
Standard roll width:
Standard roll length:
50mm(2"), 63mm(2.5"), 75mm(3"), 100mm(4")
45m, 50m
Shelf Life/
Storage
One year when stored at +10¢XC to +30¢XC /
50% relative humidity out of direct sunlight.

The tape adhesion may be improved by storing the
tape at room temperature for 12 hours before use.

Surfaces to which tape is applied should be clean,
dry and free of grease, oil or other contaminants.
Typical Performance
Data
Service temperature
Application temperature
Elongation
Tensile strength
Peel adhesion
-20 ~ +80¢XC
+10 ~ +40¢XC
3.0%
50 N / 25 mm
25 N / 25 mm

 

DunCan DC7025W

DunCan DC7025W Flame-Retardant Self-Adhesive
White Lacquered Aluminum Foil Tape

  • 38 micron nominal high tensile strength white lacquered coating aluminum foil
    backing with aggressive flame-retardant solvent acrylic adhesive and
    protected by
    easy-release silicone release paper.

  • With white lacquered coating provides excellent enviromental protection
    and vapour barrier.

  • High quality adhesive with super strong adhesion and holding power offers reliable
    and durable Foil-Scrim-Kraft Facing joints and seems sealing in
    HVAC ductwork applications.

  • Extensively used in HVAC industry for joining and sealing foil facing laminated
    fiberglass blanket/duct board joints and seams; joining and sealing flexible
    air duct seams and connections.

  • Good aging resistance on both indoors and outdoors.

  • May also be used for other industrial uses requiring a tape with these
    characteristics and benefits.



DunCan DC7025W Flame Retardant Self-Adhesive
White Lacquered Aluminum Foil Tape

 

Features :

  • Excellent Peel Adhesion.
  • Good initial Tack & Permanent Bonding.
  • Outstanding Temperature & Aging Resistance.
  • BS 476 Class 0 compliance. Independently tested to
    BS 476 Part  6 & Part 7-Class 1.
  • Resists water vapor, odor and smoke transmission.
  • Indefinite product life after application.
  • With individual vacuum packing.



Product Characteristics :

General
Finish
DunCan DC7025W Flame Retardant Self-Adhesive White Lacquered
Aluminum Foil Tape

Nominal 38 microns white lacquered
coating aluminum foil
75 microns total thickness
without release paper
Packaging
Standard roll width:
Standard roll length:
50mm(2"), 63mm(2.5"), 75mm(3"), 100mm(4")
45m, 50m
Shelf Life/
Storage
One year when stored at +10¢XC to +30¢XC /
50%relative humidity out of direct sunlight.

The tape adhesion may be improved by storing the
tape at room temperature for 12 hours before use.

Surfaces to which tape is applied should be clean,
dry and free of grease, oil or other contaminants.
Typical Performance
Data
Service temperature
Application temperature
Elongation
Surface Emittance
Bursting Strength
Tensile strength
Peel adhesion
-30 ~ +120 ¢XC
+10 ~ +40 ¢XC
3.0%
0.8
10Kg/cm
55 N / 25 mm
20 N / 25 mm


Top


Copyright © 2011 EVO Technology Company. All rights reserved. Designed by Evotech